type fcp surface mount film capacitors cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com stable stacked metallized film (pps) chips for refow soldering highlights - stacked metallized polyphenylene sulfde (pps) flm. - high operating temperature to +125 oc - high capacitance per unit volume - excellent high frequency performance - typical c from C55 oc to 105 oc 1.5% - stable cap and df over wide temperature range specifcations the type fcps combination of high capacitance density and excellent high frequency response makes it a great choice for wireless and instrumentation applications. type fcp stacked metallized polyphenelene sulfide (pps) flm capacitors ofer high capacitance per unit volume, stable capacitance and df over a wide temperature range, and excellent high frequency performance. type fcp capacitors conform to standard eia 0603, 0805, 1206, 1210, 1913 & 2416 surface mount case sizes and are packaged on tape and reel. capacitance range 100 pf to 0.22 f (1khz at 5 vrms) capacitance tolerance 5% (j) standard, 2% (g) optional rated voltage 16 vdc and 50 vdc dissipation factor (tan ) 0.6% max. (1 khz at 5 vrms) operating temperature range C55 oc to +125 oc (see voltage derating chart for 0.12 - 0.22 f above 105 oc) dielectric strength 150% of rated vdc for 60 s insulation resistance 3000 m? min. at 20 oc, after 60 s (16 vdc rated, test 10 vdc; 50 vdc rated, test 50 vdc) construction stacked metallized polyphenylene sulfde (pps) flm. terminations are lead free with a sn-ag-cu solder fnish. life test capacitors subjected to 1000 hours of maximum rated tempera - ture and 125% of the rated voltage will not have any signifcant visual damage, thecapacitance will be within 2% of the initial measured value, df will be a maximum of 0.66%, and ir will be a minimum of 1000 megohms. resistance to soldering heat capacitors subjected to a maximum of 260 c refow soldering process will not have any signifcant visual damage, the dielectric strength will be as specifed, the capacitance will be within 3% of the initial measured value, df will be a maximum of .66%, and ir will be a minimum of 1000 megohms. moisture resistance capacitors subjected to 1000 h at 40 c and 90% to 95% rh and rated voltage will not have any signifcant visual damage, will withstand 1.3 times the rated voltage for one minute, the capaci - tance will be within 2% of the initial measured value, df will be a maximum of 0.9%, and ir will be a minimum of 1000 megohms. rohs compliant
type fcp surface mount film capacitors cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com ratings capacitance 16 vdc 50 vdc (f) (nf) (pf) catalog case catalog case part number code part number code .00010 .10 100 FCP0603C101J-K1 0603 fcp0805h101j-j1 0805 .00012 .12 120 fcp0603c121j-k1 fcp0805h121j-j1 .00015 .15 150 fcp0603c151j-k1 fcp0805h151j-j1 .00018 .18 180 fcp0603c181j-k1 fcp0805h181j-j1 .00022 .22 220 fcp0603c221j-k1 fcp0805h221j-j1 .00027 .27 270 fcp0603c271j-k1 fcp0805h271j-j1 .00033 .33 330 fcp0603c331j-k1 fcp0805h331j-j1 .00039 .39 390 fcp0603c391j-k1 fcp0805h391j-j1 .00047 .47 470 fcp0603c471j-k1 fcp0805h471j-j1 .00056 .56 560 fcp0603c561j-k1 fcp0805h561j-j1 .00068 .68 680 fcp0603c681j-k1 fcp0805h681j-j1 .00082 .82 820 fcp0603c821j-k1 fcp0805h821j-j1 .0010 1.00 1000 fcp0603c102j-k1 fcp0805h102j-j1 .0012 1.20 1200 fcp0603c122j-k1 fcp0805h122j-j1 .0015 1.50 1500 fcp0603c152j-k1 fcp0805h152j-j1 .0018 1.80 1800 fcp0603c182j-k1 fcp0805h182j-j1 .0022 2.20 2200 fcp0603c222j-k1 fcp0805h222j-j1 .0027 2.70 2700 fcp0603c272j-k1 fcp0805h272j-j1 .0033 3.30 3300 fcp0805c332j-j1 805 fcp1206h332j-h1 1206 .0039 3.90 3900 fcp0805c392j-j1 fcp1206h392j-h1 .0047 4.70 4700 fcp0805c472j-j1 fcp1206h472j-h1 .0056 5.60 5600 fcp0805c562j-j1 fcp1206h562j-h1 .0068 6.80 6800 fcp0805c682j-j1 fcp1206h682j-h1 .0082 8.20 8200 fcp0805c822j-j2 fcp1206h822j-h2 .010 10 10000 fcp0805c103j-j2 fcp1206h103j-h2 .012 12 12000 fcp1206c123j-h1 1206 fcp1210h123j-g1 1210 .015 15 15000 fcp1206c153j-h1 fcp1210h153j-g1 .018 18 18000 fcp1206c183j-h1 fcp1210h183j-g2 .022 22 22000 fcp1206c223j-h1 fcp1210h223j-g2 .027 27 27000 fcp1206c273j-h2 fcp1210h273j-g2 .033 33 33000 fcp1206c333j-h2 fcp1210h333j-g3 .039 39 39000 fcp1206c393j-h3 fcp1210h393j-g3 .047 47 47000 fcp1206c473j-h3 fcp1913h473j-e1 1913 .056 56 56000 fcp1210c563j-g2 1210 fcp1913h563j-e1 .068 68 68000 fcp1210c683j-g2 fcp1913h683j-e1 .082 82 82000 fcp1210c823j-g3 fcp1913h823j-e2 .100 100 100000 fcp1210c104j-g3 fcp1913h104j-e2 .12 120 120000 fcp2416h124j-d1 2416 .15 150 150000 fcp2416h154j-d1 .18 180 180000 fcp2416h184j-d3 .22 220 220000 fcp2416h224j-d4 stable stacked metallized film (pps) chips for refow soldering
type fcp surface mount film capacitors cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com typical temperature characteristics typical frequency characteristics stable stacked metallized film (pps) chips for refow soldering 1 10 100 1000 - 60 - 40 - 20 0 20 40 60 80 100 120 140 1000megohms temperature ( c) 100 to 1000 pf 0.01 f 0.1 f 0.22 f insulation resistance
type fcp surface mount film capacitors cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com outline dimensions case code outline dimensions (in.) case code (metric) outline dimensions (mm) packaging code l 0.008 w t0.008 t l 0.2 w t0.2 t 0603 0.063 0.0320.006 0.0280.006 0.0140.008 1608 1.6 0.800.15 0.700.15 0.350.2 k1 0805 0.079 0.0490.008 0.035 0.0180.010 2012 2.0 1.250.2 0.9 0.450.25 j1 0.043 1.1 j2 1206 0.126 0.0630.008 0.035 0.0260.012 3216 3.2 1.60.2 0.9 0.650.3 h1 0.043 1.1 h2 0.059 1.5 h3 1210 0.126 0.0980.008 0.043 0.0260.012 3225 3.2 2.50.2 1.1 0.650.3 g1 0.059 1.5 g2 0.083 2.1 g3 1913 0.189 0.1300.012 0.059 0.0310.012 4833 4.8 3.30.3 1.5 0.800.3 e1 0.083 2.1 e2 2416 0.236 0.1610.012 0.075 0.0310.012 6041 6.0 4.10.3 1.9 0.800.3 d1 0.098 2.5 d3 0.110 2.8 d4 stable stacked metallized film (pps) chips for refow soldering 1 10 100 1000 10000 0.00010 0.00100 0.01000 0.10000 1.00000 dv/dt (v/us) capacitance (uf) 50v fcp 16v fcp
type fcp surface mount film capacitors cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com fcp 0805 50 vdc rating vrms and arms vs. frequency stable stacked metallized film (pps) chips for refow soldering 0.00 0.10 0.20 0.30 0.40 0.50 10 100 1000 arms frequency (khz) 3300 pf 4700 pf 5600 pf 6800 pf 8200 pf .01 uf fcp 1206 50 vdc rating vrms and arms vs. frequency 0.00 0.05 0.10 0.15 10 100 1000 arms frequency (khz) 100 pf 560 pf 820 pf 1200 pf 1800 pf 2200 pf 2700 pf 1 10 100 10 100 1000 vrms frequency (khz) 100 pf to 2700 pf 1 10 100 10 100 1000 vrms frequency (khz) 3300 pf to 0.010 uf
type fcp surface mount film capacitors cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com stable stacked metallized film (pps) chips for refow soldering 0.00 0.50 1.00 1.50 10 100 1000 arms frequency (khz) .039 uf .033 uf .027 uf .012 uf .015 uf .022 uf .018 uf fcp 1210 50 vdc rating vrms and arms vs. frequency 10 100 10 100 1000 vrms frequency (khz) .012 uf .039 uf .033 uf .027 uf .022 uf .015 uf 10 100 10 100 vrms frequency (khz) 0.047 uf 0.22 uf 0.18 uf 0.15 uf 0.12 uf 0.10 uf 0.082 uf 0.068 uf 0.056 uf 30vrms fcp 1913 & 2416 50 vdc rating vrms and arms vs. frequency 0.00 0.50 1.00 1.50 10 100 arms frequency (khz) 0.047 uf 0.056 uf 0.068 uf 0.082 uf 0.10 uf 0.12 uf 0.15 uf 0.18 uf 0.22 uf 1 10 100 10 100 1000 vrms frequency (khz) maximum ac voltage fcp 16vdc series 100pf - 0.1 f 11 vrms the capacitor surface temperature should not exceed 125 oc.
cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com in pll circuit applications, fcp smt flm capacitor advantages are tight tolerance on the capacitance value, stable capacitance with temperature, faster lock-up times, and no noise due to piezoelectric effects. type fcp surface mount film capacitors stable stacked metallized film (pps) chips for refow soldering typical applications
notice and disclaimer: all product drawings, descriptions, specifcations, statements, information and data (collectively, the information) in this datasheet or other publication are subject to change. the customer is responsible for checking, confrming and verifying the extent to which the information contained in this datasheet or other publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on the knowledge that the cornell dubilier company providing such statements (cornell dubilier) has of operating conditions that such cornell dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter C and cornell dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by cornell dubilier with reference to the use of any cornell dubilier products is given gratis (unless otherwise specifed by cornell dubilier), and cornell dubilier assumes no obligation or liability for the advice given or results obtained. although cornell dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.
|
